[Tigers] Oil Pressure Hose/Fitting

[Richard Bruner]

The oil pressure hose on my car cracked near the block, with a predictable
result.  I cut the cracked section off, and am trying to get the old,
brittle hose back on the barbed fitting.  I've tried a lighter, a
hair dryer and a heat gun so far, with no luck.  The hose blisters
before getting hot enough to go on the fitting.



Any suggestions?



Richard Bruner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20181005/b33f1d83/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2409a.JPG
Type: image/jpeg
Size: 116584 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20181005/b33f1d83/attachment-0001.jpe>