[Tigers] rear axle hub puller

[steve wick]

That looks really similar to the one I built for myself, which is also still packed from a move.

Steve
________________________________
From: Tigers <tigers-bounces at autox.team.net> on behalf of clyde mclaughlin via Tigers <tigers at autox.team.net>
Sent: Thursday, February 17, 2022 3:30 PM
To: tigers at autox.team.net <tigers at autox.team.net>
Subject: [Tigers] rear axle hub puller

I know the conversation about rear axle hub pullers was pretty well exhausted a couple weeks ago, I have recently moved and finally got this unpacked so I thought I would forward along a pix of the puller I made and it works perfectly, it has probably taken off a half dozen or so, the key is a strong plate with NO FLEX and the large jack screw, set this up put a really good strain on the jack screw and then smack it with a good hammer and BANG it pops off.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20220218/fa076f56/attachment.htm>