[Tigers] Rear End

[Clyde Mclaughlin]

Randy's ring and pinion is probably a good bet

On Sun, Apr 7, 2024 at 1:04 PM Jeffery Randall <jefferyrandall at gmail.com>
wrote:

> Also try Richmond gear directly.
>
> On Sun, Apr 7, 2024 at 12:27 PM Jeffery Randall <jefferyrandall at gmail.com>
> wrote:
>
>> Try Speedway Motors.
>>
>> On Sun, Apr 7, 2024 at 9:53 AM Dr. T. Y. McDowell <tym2 at comcast.net>
>> wrote:
>>
>>> Good Morning Tigers,
>>>
>>> I'm having an issue finding a ring and pinion for my Mk1A Tiger.
>>> Years ago I had the original 2.88s replaced with a 3.73 posi unit.  The
>>> 3.73 gears are just way too steep, so I want to go with a 3.08 (or
>>> something close).
>>>
>>> I got a ring/pinion set from Summit (USA Standard Gear) but it's a 26
>>> spline and I need a 10 spline.
>>>
>>> I called Summit yesterday and they said the only ring/pinion 10 spline
>>> they had was a 4.56!
>>>
>>> Does anyone have any idea where I might get one a ten spline ring/pinion
>>> that will fit?  I don't want to have to go to changing the yoke/driveshaft,
>>> etc.
>>>
>>> Thanks in advance.
>>>
>>> Tym McDowell
>>> _______________________________________________
>>>
>>> tigers at autox.team.net
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/pipermail/tigers
>>> http://autox.team.net/archive
>>>
>>> Unsubscribe:
>>> http://autox.team.net/mailman/options/tigers/jefferyrandall@gmail.com
>>>
>>>
>>> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/clydemclaughlin618@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20240408/a33df45f/attachment.htm>