[Tigers] [Jensen-cars] Any hot rodders out there

[Daniel Eiland]

Paul,
Don't know if that will work but I'll try it.
Dan 

Sent from AT&T Yahoo Mail on Android 
 
  On Sun, Nov 24, 2024 at 5:41 PM, 'Paul Rollins' via Jensen Cars<jensen-cars at googlegroups.com> wrote:     Would a short section of 1/4" plastic tubing on the tank inlet allow the 3/8" hose to slip over it for a tight fit?       Paul  
  On 11/24/2024 3:38 PM PST Daniel Eiland <deiland1 at att.net> wrote:          I have an aluminum aftermarket radiator with an overflow nipple that's 3/8 inch. My aftermarket overflow tank has an inlet tube of 1/4 inch. I'm wondering if anyone has come across this issue before, and if so how did you resolve the issue. I tried a reducing 90 deg;ree ellbow on my tank but it just slides off. Any suggestions out there?      See attached photos:   _   Below is the same type overflow tank I'm using. The inlet line is 1/4 inch.           
 
   The photo below shows my radiator with a 3/8 inch overflow nipple to the right of the filler cap.      I was hoping I could mount a 90 degree elbow to the inlet on the bottom of my overflow tank, then route the overflow tube under the radiator, then up the right side of the radiator to the overflow nipple. Turns out the elbow I bought is made of rubber so it just slips loose from the fittings. Tried to clamp it down and it still slips loose.        Any suggestions on how I can get from 3/8 inch hose to 1/4 inch hose?       TIA,       Dan Eiland    
 
 
  Sent from AT&T Yahoo Mail on Android   
 
 -- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group. 
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com. 
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/1322231923.2407608.1732491503904%40mail.yahoo.com. 
 

-- 
You received this message because you are subscribed to the Google Groups "Jensen Cars" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jensen-cars+unsubscribe at googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/jensen-cars/892951008.416342.1732495254742%40connect.xfinity.com.
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/0eee3a82/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sum-299990_xl.jpg
Type: image/jpeg
Size: 102444 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/0eee3a82/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20241123_222209.jpg
Type: image/jpeg
Size: 419576 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20241125/0eee3a82/attachment-0003.jpg>