[TR] bushing/trunnion clearance

[Randall]

> Not all trunnions are created equal.  Mt suggestion is to 
> take the trunnions
> to the machine shop and work them to fit.  That's what I have 
> done for my
> TR3s.

BTW it's still a good idea to ream the bushings, IMO.  Mine were not round
as installed, which I believe is the point of supplying them undersize.  

I would be very suspicious of any trunnion that had an off-size pin ... the
pins might not be hardened in addition to not being ground to size.

Randall