[TR] TR4 cut out under power

[Lee&John Howard]

Thank you all. I'll get back on it tomorrow and let you know. So far i don't
think I've done or misdone any of your collective moves.
John

On Wed, Apr 30, 2008 at 4:48 PM, Geo & Kathleen Hahn <
ahwahnee at cybertrails.com> wrote:

> In addition to all that Randall mentioned, I would check the little lead
> from the coil to the dizzy... white w/ a black stripe if the wiring is
> original/correct.  That wire leads a hard life and can fail at either
> connector.  Without it you have a 2000 lbs semi-portable radio.
>
> Geo
>
> ----- Original Message ----- From: "Randall" <tr3driver at ca.rr.com>
>
>
> > If the points appear to be always open, check the flexible lead from the
> > dizzy side terminal to the points, as it can sometimes break internally
> > and
> > not conduct even though it looks OK.