[TR] Painting brake calipers?
Randall
tr3driver at ca.rr.com
Fri Nov 7 11:56:15 MST 2008
> If you have converted to DOT 5, you have to go to extreme
> measures to get
> the surface prepared so that the paint does not fisheye.
I agree, except the "extreme measures" can be as simple as wiping down with
a purpose-made solvent, like Acryli-Clean (PPG DX330) or Prepsol (DuPont).
Most solvents (like lacquer thinner) won't touch it, but Acryli-Clean takes
it right off.
It usually also picks up a lot more rust than you thought was left, too <G>
Randall
More information about the Triumphs
mailing list