[TR] Anti squeal shims

[Joe Laurito]

Tom;

You old retired guys don't have anything better to do so install them
without the cutouts and see what happens. If they still shriek, pull them
out as start all over. Let me know how you make out so that when I do the
job, I can do it right the first time. :^)

Joe 

-----Original Message-----
From: triumphs-bounces+trglory=comcast.net at autox.team.net
[mailto:triumphs-bounces+trglory=comcast.net at autox.team.net] On Behalf Of
Tom Note
Sent: Thursday, September 11, 2008 1:04 PM
To: Randall; 'TR List'
Subject: Re: [TR] Anti squeal shims

----- Original Message ----- 
From: "Randall" <tr3driver at ca.rr.com>
To: "'TR List'" <triumphs at autox.team.net>
Sent: Thursday, September 11, 2008 11:29 AM
Subject: Re: [TR] Anti squeal shims


>> I believe shims usually
>> have
>> a  "D" shaped cutout slightly smaller than half the diameter of the
>> piston.
>> Are these cutouts necessary , or would a plain shim work as well?