[TR] TR2 Generator/Electric Motor
Geo Hahn
ahwahnee18 at gmail.com
Tue Sep 16 12:51:38 MDT 2008
I'va always been able to squeeze a belt thru there on the TR3 though
as Randall notes cranking the steering to full lock opens up the gap a
bit. A cogged belt also seems to get thru more easily.
On the TR4 OTOH, have never been able to change a belt w/o loosening
motor mounts and jacking up the engine (and they are nearly new motor
mounts).
On 9/15/08, Randall <tr3driver at ca.rr.com> wrote:
> Shouldn't need to jack the engine up. If necessary, add shims to the motor
> mounts (as the factory did) and to the radiator mounts to keep the crank
> hole lined up with the crank dog. Don't forget that turning the steering
> wheel can also move the center link away from the pulley.
More information about the Triumphs
mailing list