[TR] Rear Brake Cylinder Installation

[Bob Danielson]

Dave,
In looking at the rear brake diagram at Moss, the TR4 looks to be similar to
the TR6 so maybe this might help:
 http://tr6.danielsonfamily.org/BrakeUpgrade2.htm


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of Dave Connitt
Sent: Sunday, September 28, 2008 11:11 AM
To: Triumphs at autox.team.net
Subject: [TR] Rear Brake Cylinder Installation

List,
Does anybody know of a a specific website that shows the steps involved in
installing these brake cylinders? Every time I take the backplate off, I
have to replace the nyloc nuts holding the hub in and I want to minimize the
replacement. Actually, I guess I could do this on the frame but it seems
much easier to install the brake parts off the car and on my work bench..
Thanks,
Dave Connitt
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as 75tr6 at tr6.danielsonfamily.org

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.7.4/1695 - Release Date: 9/27/2008
1:11 PM