[TR] TR3A Pinion Driving Flange

[Dave1massey at cs.com]

In a message dated 4/7/2009 7:49:49 AM Central Daylight Time, WCA09 at aol.com 
writes: 
> In replacing my rear axle pinion oil seal, I note that the flange itself  
> shows considerable wear.  So much so that I doubt even a new seal will  
> actually 
> 'seal' as it should.  I also note that Moss sells a Speedi-Sleeve  to remedy 
> 
> this exact situation.  It apparently is pressed over the worn  area 
> providing a 
> 'new sealable surface' (their claim).  Does anyone have  experience with the 
> 
> Speedi-Sleeve?  Does it really work?  
> 
 Indeed it does.  I had an annoying leak on my TR6 diff even after replacing 
the seal.  I put in a Speedi Sleeve and the leak virtually stopped.  Even with 
the old seal.

I highly recommend it.

Dave