[TR] TR4/Webers - that banging noise- #2

[Lee&John Howard]

No I haven't done that and don't know how. I presume the engine has to be
buttoned up for such a test. How would I do it?
John

On Fri, Aug 7, 2009 at 3:39 PM, Randall <tr3driver at ca.rr.com> wrote:

> > I don't see anything. The rod cap was torqued properly with bearings in
> > place, the valves all look fine. Push rods look straight and true. No
> > scarring or marking of any kind in the cylinder. No marks on the piston
> > head.
>
> I think this was mentioned before ... did you check first for an exhaust
> leak at #2?  That can sometimes produce a "bang bang bang" each time the
> cylinder fires.
>
> -- Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as leejohn7 at gmail.com
>
> http://www.team.net/archive