[TR] TR4A: Clutch fork and shaft
Tony Drews
tony at tonydrews.com
Sat Dec 4 11:37:14 MST 2010
I would still recommend the crossdrill / 1/4" bolt.
- Tony Drews
At 11:05 AM 12/4/2010, Cliff Hansen wrote:
>I'm replacing the fork and shaft due to a broken pin. I was
>planning to crossdrill and fit a 1/4" bolt but noticed that some
>vendors are now selling a hardened pin. Would using the hardened
>pin accomplish the same purpose as fitting the bolt? I would
>appreciate any advice.
>
>I also thought I'd share a positive experience with TRF. The TR4A
>project has been stalled for a number of years but health, family
>and finances have aligned favorably once more. I recently placed an
>order with TRF; my last order with them was in 2001. The charge to
>my card was about $300 less than the cost of the order. When I
>called to ask about the difference, they informed me that they had
>applied credits and a gift certificate that had been in their files
>since my last order - 9 years ago - and which I had completely
>forgotten about. That speaks volumes about integrity and the value
>they place on their customers.
>
>Cliff
More information about the Triumphs
mailing list