[TR] Tr4 Electric Radiator Fan

[Jim Vassiliadis]

I wanted to remove the existing TR6 plastic fan as well as the extension so
I could put the fan behind the radiator, so the fan pulls but that seems
like a silly idea so I will put it in front of the radiator.
I want to take the existing fan off to save a few horse power. What's is
your opinion?

-----Original Message-----
From: Geo Hahn [mailto:ahwahneetr at gmail.com]
Sent: Sunday, 19 December 2010 5:08 a.m.
To: Jim Vassiliadis
Cc: triumphs at autox.team.net
Subject: Re: [TR] Tr4 Electric Radiator Fan


On 12/17/10, Jim Vassiliadis <diggle at clear.net.nz> wrote:
> My Tr4 radiator measures 12" in width.
> What size fan would I install a 10" or 12" electric Fan?

Lots of interesting options... I put the 12" version on my TR4 mounted
(high) as a pusher with the stock fan still in place.

Same thing on my TR3A -- the 12" fan still permits use of the crank hole.

You didn't say whether this was going to be an auxiallary or your only
fan -- might make a difference in how you proceed.

Geo