[TR] '3a Alternator conversion...

[HANS DEFERRANTE]

Randy, I reconditioned my TR3 generator --- resurfaced commutator  
myself, new brushes , new bushing (front bearing bearing was still  
good) ---- and found the generator  to be more than adequate to  
handle , not only the starter, but also an add- on  12" radiator fan  
with the radio, heater and all the lights on at bright beam. Total  
cost was about about  $35,  including installation of the bushing by  
a shop. The bushing was so bad, the armature was rubbing on the  
stator. If the stator windings are in good condition, it is worth it,  
I think.
  There is a reconditioning procedure online.
  If you are interested, I'll dig it up.

Hans




On Jun 13, 2010, at 7:53 PM, Randy&Val DeRuiter wrote:

> t was the deciding point for me.  I recommend
> the tech areas on the VTR website