[TR] TR3A Manifold

[cfmtr3a at verizon.net]

Ran into a glitch.  The inlet manifold I used is missing the 'tab' that the carb linkage connects to.  

My engine calls for #305547; description: MANIFOLD, inlet, high port with boss on balance tube TR3 from TS13053, TR3A 
The one on the engine is #302119;  description: MANIFOLD, inlet, high port TR3 from TS9350 to TS13052E 

I have access to a #119 - are they interchangeable other than the balance tube?  

I also have a #305744: MANIFOLD, inlet, long curved tubes no tapping with TR4 to CT21470; if anyone is interested.  Note that the carb linkage piece is bent - not on the manifold but the attachment.  would need to be cleaned up....

Thanks
Carl
TS81802LO - home from the painter and now the 'bits' go back on....