[TR] clutch fork pins

[Gary Nafziger]

Yesterday I tried to remove the little pins on the fork that actuates the throw 
out bearing and could not get them off.  I was using a bench vise and put all 
the pressure I could.  It got me to thinking.........which way do they come 
off?  I assumed they push out toward the outside of the fork so I was pushing 
from the inside.  However on close inspection I'm thinking maybe they should be 
pushed toward the inside to get them off?

If they are installed from the inside pushing them out.........then they must 
have been peened over on the outside since mine have that look on the outside.  
They are not worn as bad as they could be so I'm thinking of leaving them as 
they are rather than ruining something.

just curious

gary n.