[TR] TR3 Defroster (continued)

[William Brewer]

    Yeah, I had everything plugged up at the heater except the driver's side defrost.
    I'll post to the list how smoother ducts and a modified defroster vent work.
    Man, this project just won't end. If it would, then I bet that everyone else would have done the same thing by now.

     -Bill


Date: Mon, 25 Oct 2010 11:12:37 -0700
From: carlsereda <carlsereda at aol.com>
Subject: Re: [TR] oversize TR3 heater
To: triumphs at autox.team.net
Message-ID: <CFD28A1B.E1BD.4BD0.A23C.C67BE4245697 at aol.com>
Content-Type: text/plain; charset="us-ascii"

Bill
did you leave passenger side heater port unhooked up?.. blown air
would exit that side that has less resistance versus your restrictive
(hooked up) driver side
Carl 63TR474

I only hooked up the driver's side as a test. Driving to work this
morning I configured the vents so 100% of the heater air would go
through the drivers defroster. Man, barely any air would come out. As
a matter of fact, it was hard to tell if ANY air was coming though.