[TR] rear oil seal TR3

[wbeech at flash.net]

Don,

It leaked badly, and then we learned that the machine shop neglected to put
the pressure relief holes in the rear cap.  Everything else was re-checked
and is in perfect spec. 

Now is only leaks moderately, I did not give away my bag of oil-dri.  
 
Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"


________________________________

From: Don Spence [mailto:dkspence at telus.net] 
Sent: Wednesday, February 23, 2011 10:13 AM
To: triumphs at autox.team.net
Subject: Re: rear oil seal TR3


Bill 
 Are saying the "modern MOSS oil seal" leaked and had to be replaced?
Thanks
Don



	
	

	From: <wbeech at flash.net>

	Date: February 23, 2011 12:12:43 AM MST (CA)

	To: "'Frank Fisher'" <yellowtr3 at yahoo.com>,
<triumphs at autox.team.net>

	Subject: Re: [TR] rear oil seal TR3

	
	

	
	

	Frank,

	I think you are asking if it can be done without pulling the engine.
I

	asked this question last year and the overwhelming sentiment was to
pull the

	motor & trans.  While it CAN be done in-situ, the effort and
headaches make

	pulling the engine a much easier option.

	
	

	And yes, I pulled the engine/trans as a unit then when in to replace
the

	modern MOSS oil seal. 

	
	

	Bill