[TR] Shaking TR3
Dave1massey at cs.com
Dave1massey at cs.com
Fri Jun 17 13:24:08 MDT 2011
In a message dated 6/17/2011 1:14:57 PM Central Daylight Time,
dkspence at telus.net writes:
> That only works going the other way. Steel to wires. Your product
> would only exacerbate an already dangerous situation as in preventing
> the lug nuts from a full "grasp" of the studs
>
I think that's what he meant. If you have wires and spacers you can remove
the spline hubs and spacers and bolt up a steel wheel. Easy-peasy.
Dave
More information about the Triumphs
mailing list