[TR] New Vitron rear seal Q

[wbeech at flash.net]

Yes John,

We just removed the bearing caps and with a rolling motion were able to pull
the real of crank clear enough to change the seal.  

ISTR that we only loosened, not completely removed, the front cap and that
gave enough to get the job done.

Bill

Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Sunday, May 01, 2011 12:18 PM
To: triumphs at Autox.Team.Net
Subject: [TR] New Vitron rear seal Q

Is it possible to fit the new type rear TR seal with the crank and con rods
in place, as I have the engine out it seems opportune, but reluctant to
strip the whole engine down. I also have 3 sets of spare rear aluminum
housings I would be happy to donate to "the cause"

Regards
John
1954 TR2
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net