[TR] TR4 upper A-arms front suspension?

[Dean Tetterton]

Big curve to the front and shallow to the rear. This is to angle the verticle
link to the back for 3 degrees caster. Must have trunnions that are right
side and left side, not the same.

Dean



On Dec 22, 2012, at 2:06 PM, TR250Driver at aol.com wrote:

> Hey Guys,
> I'm working on the 63 TR4's front suspension. This is the later type  with
> front & back upper A-arms. I am confused for some reason as to  which is
> which?  Yikes I should know this!  I am going to say that the  arm with the
> bigger curve in it is the front.  Then the one that is not  curved as much
is
> the back.  I'm looking at the various assembly diagrams  and I can't really
> tell from those.  I don't want to be wrong and have a do  over.  Can a
anyone
> confirm this?  I would really appreciate it.
> Thanks,
> Darrell
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tr3a58@verizon.net