[TR] Routing path for Speedo cable on TR4A

[Dave Connitt]

Thanks George..

George Hahn brought up a good point.. I don't have a overdrive.
Dave Connitt
  ----- Original Message -----
  From: Geo Hahn
  To: Dave Connitt
  Sent: Sunday, April 07, 2013 10:02 AM
  Subject: Re: [TR] Routing path for Speedo cable on TR4A


  Dave -

  You probably want to mention if you have an overdrive gearbox and if you do,
whether or not you are using an angle drive (short cable) or no angle drive
(long cable).

  Geo



  On Sun, Apr 7, 2013 at 6:40 AM, Dave Connitt <dconnitt at fuse.net> wrote:

    List,
    I have another routing question.
    Last night when I was getting things ready to mount the transmission
tunnel, I
    noticed the speedometer drive fitting on the transmission and thought it
would
    be smart to run that cable before I installed the transmission tunnel.
    Can anyone help me with that? I am thinking it comes up the inside of the
    tunnel and then double backs into one of the holes in the firewall. Also,
    looking at the firewall, driver side from the engine compartment I have
three
    holes that are about 3/4-1 inch in diameter. I think the windshield wiper
    wires go in the right hand one, tach cable in the center one and the
    speedometer cable in the left? Is that correct?
    Thanks,
    Dave Connitt
    '67 TR4A IRS
    http://home.fuse.net/davestr4a

    ** triumphs at autox.team.net **

    Donate: http://www.team.net/donate.html
    Archive: http://www.team.net/archive
    Forums: http://www.team.net/forums
    Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com