[TR] TR engine block

[Geo Hahn]

On Mon, Jan 28, 2013 at 9:25 PM, David B. Hammond <dbh at hamengr.com> wrote:

> Just pulled the head only to discover a broken stud midway on pass side.
>


If you haven't already, I would be soaking that guy with PBlaster.
Hopefully it is not in there real tight.

I once had one break off but when I reinserted the jagged broken piece it
was able to engage its mate and by pressing down I was able to thread it
out.  I don't expect to get that lucky twice in one lifetime.

Geo