[TR] TR6 Rear Shock Conversion

[Randall]

---- Dave <dave1massey at cs.com> wrote: 
> Run, don't walk, away from this conversion.  This puts the shock
> loading onto the inner wheel well which was not designed for this
> loading. 

I believe you are thinking of a different conversion.  The "Blind Moose" conversion is the one that Herman van den Akker designed and installed on his own TR250.  It only attaches to the original shock mount.
http://www.blindmoosefab.com/rear_shock.htm

BTW, the original shock mount wasn't really designed for the load that a tube shock puts on it either.  I've heard many reports of it breaking.  So some reinforcement is probably a good idea.

Randall