[TR] Removing diff flang

[Jonas Payne]

Last one I did was heated red hot and went off like a gun right at 50 tons.  

Scary.

Sent from my iPhone

> On Aug 24, 2015, at 5:30 PM, Jack Mc <McGaheyRx at aol.com> wrote:
> 
> NO
> 
> You will need at least a 50 ton press - or take it to somebody who has one. We've done a number  of these and we take them to a shop that rebuilds electric motors to get the flanges pressed off - they told us one particular flange from a TR4 diff took over 70 tons, a lot of heat, and a long wait before it came off with a BANG.
> 
> YMMV
> 
> Cheers, 
> Jack Mc
> 
> Sent from my iPad
> 
>> On Aug 24, 2015, at 7:17 PM, Sujit Roy <triumphstag at gmail.com> wrote:
>> 
>> 
>> 
>> Will these come off with a simple 3 jaw puller? I don't want to bend them.
>> 
>> I haven't tried yet, but thought I'd check with the list.
>> I have a Stag, but I think TR6's use the same size flanges.
>> 
>> Sujit
>> 
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mcgaheyrx@aol.com
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jpaynepbr@cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150824/02308668/attachment.html>