[TR] voltage regulator

[dave n]

not the voltage stabilizer that manages the temp and gas gauge.  this is the voltage regulator that sits on the firewall in the engine compartment

From: Dave 
Sent: Friday, July 3, 2015 4:47 PM
To: triumphs at autox.team.net 
Subject: Re: [TR] voltage regulator

Do you have, perhaps, an electric temp gauge?  My 57 was so equipped.  But those were actually early TR4 gauges and used a voltage stabilizer.  The 57 TR3 had a fluid filled temp gauge so the only gauge that needed stabilization is the fuel gauge.  My TR3 has a fuel gauge with three terminals and two coils - internally compensated.  No voltage stabilizer in my car.  Now.



Dave Massey




-----Original Message-----
From: dave n <dave at ranteer.com>
To: triumphs <triumphs at autox.team.net>
Sent: Fri, Jul 3, 2015 4:26 pm
Subject: [TR] voltage regulator


on a 57 tr3 – it looks like it is held in by two bolts?  I don’t see anything in the moss catalog nor the manual.  what’s the correct way to bolt it in? 

** triumphs at autox.team.net **

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com


--------------------------------------------------------------------------------

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave@ranteer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20150703/7c97641c/attachment.html>