[TR] Clutch issue solved

[Andrew Uprichard]

Thank you to all who replied.  Today I created a power bleeder from my
radiator pressure tester, applied 25 psi and went under the car to bleed the
(new) slave.  Immediately got air and when I tightened the bleeder screw the
air went back up the tube into the cylinder.

 

Turns out the bleeder on the new aftermarket slave was not sealing.
Replaced it with a restored Girling and all is well.

 

Andrew Uprichard

 

P.S. An additional lesson I learned was to use a tube when bleeding the
slave:  the friend who was helping me over the weekend chose just to let the
fluid drain on the floor and so never saw the air returning.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20151102/0ca0002d/attachment.html>