[TR] how to remove a stuck wire wheel
hdrider570 at att.net
hdrider570 at att.net
Wed Apr 6 17:54:55 MDT 2016
You did not say whether it is the nut that is stuck or the wheel.
If it is the nut soak in PB Blaster or equivalent for a couple of days
and use a pipe on the wrench.
If it is the just the wheel we use to use a high pressure airline with
an air nozzle on it to blow the rust dust out of the splines. You just
wiggle a bit and then blow, repeat as necessary, which is usually quite
a while.
Edward Hamer
Petaluma CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160406/e8b2c0d1/attachment.html>
More information about the Triumphs
mailing list