[TR] TR4 top

[Bob Labuz]

Andrew,

The rear attachment is similar to the 3, Lift-o-dots. The front, 
however, is attached just by slipping the cover under the top of the 
windshield frame. Inside the top there is a set of thin steel strips 
that just fit under the lip of the frame. The tension applied when you 
expand the hoodsticks secures the front. Great idea I must admit. I like 
it better than the fitting on the 4a, 250 and 6. Very secure and easy to 
set up in an emergency.

Bob

On 12/11/2017 05:31 PM, Andrew Uprichard wrote:
>
> List:
>
> I have a TR250 where the soft-top latches down on the windscreen 
> frame, and TR3s where the top is help by a row of tenax fasteners.
>
> I recently acquired an early TR4 and it isn’t clear to me how the top 
> attaches.
>
> Any help would be great.  Thanks!
>
> Andrew Uprichard
>
> Jackson, Michigan
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171212/65fbb955/attachment.html>