[TR] Triumphs Digest, Vol 10, Issue 324

[fordneynj at aol.com]

My son has an old Oliver bulldozer which blow a piston. That cylinder was badly scored. The recommended repair was to fill the scoring in layers with JB weld, allowing each layer to throughly cure. When the JB weld was slightly proud of the cylinder wall, he honed it. Any low spots were filled again and honed again. this was repeated until the wall felt smooth. New piston, rings and rod installed. This was a year and a half ago. Amazing! Need I say.Rodney Ford

Message: 2
Date: Fri, 15 Dec 2017 13:02:06 -0500
From: ptegler at verizon.net
To: ahwahneetr at gmail.com, triumphstag at gmail.com
Cc: triumphs at autox.team.net
Subject: Re: [TR] Can I use jb weld to fix an al-----Original Message-----
From: Geo Hahn <ahwahneetr at gmail.com>
To: Sujit Roy <triumphstag at gmail.com>
Cc: Triumphs <triumphs at autox.team.net>
Sent: Fri, Dec 15, 2017 11:23 am
Subject: Re: [TR] Can I use jb weld to fix an aluminum bracket to an aluminum grill.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171216/7a1c9819/attachment.html>