[TR] TR3 Rear Axle

[wbeech]

Jim,
I presume you are talking about what Moss describes at the Pinion
Flange(674.250)?  You just need to turn it left or right to align the
splines and it should slip right on, be sure you are good and square to the
shaft.  I have this same job to do this weekend, received my new seal today.
Bill

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Jim
Henningsen
Sent: Thursday, December 28, 2017 4:29 PM
To: triumphs at autox.team.net
Subject: [TR] TR3 Rear Axle

Is there a trick to getting the rear pinion yoke back on the pinion on a
TR3A?  I have put a new seal in and the yoke doesn't want to seat on the
pinion and slide on.  
Thanks in advance,
Jim Henningsen
Ocala, FL


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net