[TR] Torque Spec on bolts

[Stan Foster]

I have two. One that stays in the spare wheel compartment along with the jack-that-will-never-be-used and one that I keep in the garage for setting points and valve timing. I have never used it to start the engine however.

Stan

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Dave
Sent: Monday, July 3, 2017 7:53 AM
To: forzion7 at gmail.com; hdrider570 at att.net
Cc: triumphs at autox.team.net
Subject: Re: [TR] Torque Spec on bolts

Sounds like a poll.

1 Me


Dave Massey


-----Original Message-----
From: David Friedlander <forzion7 at gmail.com<mailto:forzion7 at gmail.com>>
To: hdrider570 <hdrider570 at att.net<mailto:hdrider570 at att.net>>
Cc: TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>
Sent: Sun, Jul 2, 2017 6:45 pm
Subject: Re: [TR] Torque Spec on bolts
I wonder what percentage of owners even own a handcrank!

On Jul 2, 2017 7:00 PM, "hdrider570 at att.net<mailto:hdrider570 at att.net>" <hdrider570 at att.net<mailto:hdrider570 at att.net>> wrote:
I expect that it sized by anticipated load of using the hand crank while starting rather than strength of the connection need to retain the snout.

Edward Hamer
Petaluma CA

** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com

** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170703/021164c4/attachment.html>