[TR] Oil Pressure Gauge Line

[EDWARD WOODS]

Replaced the oil line on a club member's TR6 through the ash tray just this past year.


Ed Woods

> On January 28, 2018 at 9:16 AM Jerry Van Vlack <jerryvv at roadrunner.com> wrote:
> 
>     Have you tried to do that? I doubt it will be very easy or not at all possible.
>     You might be able to loosen the dash and pull the top out and reach behind to release the gauge from the dash, pull the gauge, replace the line and re-assemble. You may need to release the tach and speedo drive cables.
>     JVV
>      
>     From: Alex & Janet Thomson
>     Sent: Sunday, January 28, 2018 8:41 AM
>     To: 'Ron Olds' ; 'Triumphs'
>     Subject: Re: [TR] Oil Pressure Gauge Line
>      
> 
>     According to Ted Schumacher, you can gain access through the ash tray hole once you pop out the tray itself.
> 
>      
> 
>     Alex Thomson
> 
>      
> 
>     From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Ron Olds
>     Sent: Sunday, January 28, 2018 8:16 AM
>     To: Ron Olds; Triumphs (triumphs at autox.team.net)
>     Subject: Re: [TR] Oil Pressure Gauge Line
> 
>      
> 
>     Everyone,
> 
>      
> 
>     Thanks everyone for your inputs. I hadn’t thought of replacing the line with a steel braided line. I will order one right away. My old plastic line broke right at the end of the ferrule. While I am at it I am going to replace the plastic clutch line with a steel braid line.
> 
>      
> 
>     Does anyone have any suggestions to getting to the back of the gauge to connect the new line? This looks as if it will quite the job to get back there.
> 
>      
> 
>     Ron Olds
> 
>     72 TR6
> 
>     50 MGTD
> 
>      
> 
>     From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Ron Olds
>     Sent: Saturday, January 27, 2018 14:52
>     To: Triumphs (triumphs at autox.team.net) <triumphs at autox.team.net>
>     Subject: [TR] Oil Pressure Gauge Line
> 
>      
> 
>     Everyone,
> 
>      
> 
>     While trying to fix more issues on the car I found that I broke the oil pressure gauge line right at the fitting in the engine block. Does anyone know if I can repair the line. Is there a way to remove the broken piece of line off the fitting and securely installing the line back on the fitting?
> 
>      
> 
>     Ron Olds
> 
>     72 TR6
> 
>     50 MGTD
> 
>      
> 
>      
> 
> 
>     ---------------------------------------------
> 
>     ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/archive
>     Forums: http://www.team.net/forums
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
> 


 

>     ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/archive
>     Forums: http://www.team.net/forums
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fogbro1@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180128/6cc5d6f5/attachment.html>