[TR] Alloy polish

[Darrell Walker]

I would think some kind of bead blasting would give the most uniform appearance.

I’ve also had good luck with this:

https://www.napaonline.com/en/p/MCR1458 <https://www.napaonline.com/en/p/MCR1458>

-Darrell

> On Mar 21, 2018, at 6:59 AM, Wbeech at flash.net <wbeech at flash.net> wrote:
> 
> Hello List,
> Continuing to clean up the TR3 motor and would like to polish the intake manifold beyond the standard dull/dirty gray.   Tried with the the Dremel using a steel and brass brush wheel and while is puts since shine every pass leaves a line/trail.  Any suggestions to achieve a uniform finish without going to a paint or coating of any sort. 
> 
> Thanks,
> Bill B
> TS30800L
> 
> Sent from my Apple II+
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180321/995b94e6/attachment.html>