[TR] Wire terminations

[Chris Kantarjiev]

On 1/9/19 11:00 AM, triumphs-request at autox.team.net wrote:
> I used to like to pre-tin crimped connections, but have since learned it is
> not really a good idea.  The problem is that solder can "cold flow".  The
> solder will actuall move away from the crimp and cause the joint to loosen
> over time.  Crimping, done properly is good.  Solder is also good, but I
> would not recommend both.

This is the best information I know about soldered connections in cars:

http://www.dimebank.com/misc/soldered_connections.html