[TR] Homemade blaster gun

[Cliff Hansen]

That’s a tube nut


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of TERRY SMITH <terryrs at comcast.net>
Sent: Thursday, January 31, 2019 2:24:39 PM
To: triumphs
Subject: [TR] Homemade blaster gun


Most blaster guns (for my TR3 wire wheels --- obligatory content) that use a pressure pot have a stop that really just plugs the end of the gun.  Supposedly, it stops the air and abrasive, except the abrasive does what abrasives are supposed to do and eats holes in the stopper.


Below is a cheap alternative, except I can't figure out what the heck to call that little brass fitting at the end that holds the nozzle in place.  Anybody know what I should look for at McMaster Carr?




[cid:c1a47998d19b493f99a9db0ece4e511c at Open-Xchange]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190201/7b10f56c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 281885 bytes
Desc: image.png
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190201/7b10f56c/attachment.png>