[TR] Stag carb adapter insulators

[Sujit Roy]

https://trf.zeni.net/TR6bluebook/38.php#AZ25

On Tue, Aug 3, 2021, 10:22 PM Sujit Roy <triumphstag at gmail.com> wrote:

> The tr6 shows a similar spacer and a gasket on either side.
>
> On Tue, Aug 3, 2021, 3:16 PM Frank Magnusson <fmags at cox.net> wrote:
>
>>
>> I'm about to replace the insulators/spacers between the carbs and the
>> pedestal adapter along with the gaskets and not sure if I need a gasket on
>> each side of the insulator/spacer or only on the carb side.  Makes sense to
>> have one on each side.  Rimmers catelog implies just one.  Also do they go
>> on dry or with sealant?  Thanks.
>>
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210803/b47275c3/attachment.htm>