[TR] Grade 2 lock nuts

[Dave Connitt]

I bet if you look in the NcMaster-Car website you will find what you need. The downside is that you will have a whole box!
Dave Connitt 

Sent from my iPhone

> On May 14, 2021, at 1:39 PM, Alex & Janet Thomson <aljlthomson at charter.net> wrote:
> 
> 
> I believe that those bolts have a ground shank of an exact length so that they act as dowel pins. I would use at least a grade 5 nut. If you can’t find locknuts, I don’t see why some red Loctite wouldn’t work. A free driveshaft, whipping around in its tunnel at speed, would probably be a negative experience.
>  
> Alex Thomson
>  
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Sujit Roy
> Sent: Friday, May 14, 2021 1:57 AM
> To: Triumphs
> Subject: [TR] Grade 2 lock nuts
>  
> 
> I need to replace the lock nuts uses to hold the diff flanges to the drive shafts on my stag. Can I use grade 2 nuts? Granger has some on clearance. I'm assuming basic nuts and bolts used Triumphs were grade 3 .
>  
> Sujit
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210514/f077bfa4/attachment.htm>