[TR] Incantation
TeriAnn J. Wakeman
tjwakeman at gmail.com
Thu Nov 11 15:57:17 MST 2021
On 11/11/21 1:30 PM, David Friedlander wrote:
You used a clutch disc centering tool to align the clutch disc to the
pilot bushing .. right? And maybe just a thin smear of grease on the
leading edge of the gearbox gears? You have the bottom of the
bellhousing sitting on a 2X4 over the crossmember. Otherwise just try to
line it up as best as possible (It helps to have you looking down and a
second person looking at the side). have the gearbox in 4th gear & when
the shaft & disc splines touch, wiggle the rear output shaft a little to
get the splines lined up. Maybe putting out a wee dram of Baleys the
night before can't hurt and you can finish off whatever is left after
the spline slides in.
TeriAnn
> On what page of the manual is the incantation to speak over this effort?
> Must be spoken with a Limey accent, right? :- )
>
> Dave
> '59 TR3A
>
>
--
Book - The Essential Guide to Overland Travel in the United States and
Canada <http://overlandtravel.us>
2 years to write and 38 years of travel and camping to learn what to write
*Because the world beckons and life waits for no one*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211111/7ab24410/attachment.htm>
More information about the Triumphs
mailing list