[TR] Incantation

[Sujit Roy]

With Stags people use 3 inch long bolts between box and engine plate. Get
it almost square and slide them together.

On Thu, Nov 11, 2021, 5:04 PM David Friedlander <forzion7 at gmail.com> wrote:

> Sounds like a plan, Tony. Ill give it a try...
>
> Thank you,
>
> Dave
>
> On Thu, Nov 11, 2021 at 7:23 PM Tony Drews <tony at tonydrews.com> wrote:
>
>> Even though the shaft won't turn, it sounds like the splines aren't
>> aligned with the clutch disk.  Have the tranny in 4th gear when trying to
>> mate them, jiggle the output of the trans to turn the input shaft.  It
>> should just slide back together.
>>
>> Regards, Tony
>> On 11/11/2021 6:11 PM, David Friedlander wrote:
>>
>> Exactly, Frank. A few candles, some incense, and an incantation in the
>> ancient language. I've checked the Bentley's and, for some
>> reason, it's not in there!
>>
>> All I changed was the TO bearing. Why the wrestling match?
>>
>> Dave
>>
>>
>>
>>
>>
>>
>> On Thu, Nov 11, 2021 at 6:59 PM Frank Fisher <yellowtr3 at yahoo.com> wrote:
>>
>>> then it should go right back in with just a little swearing in the
>>> ancient language
>>>
>>> frank
>>>
>>> On Thursday, November 11, 2021, 03:15:29 PM PST, David Friedlander <
>>> forzion7 at gmail.com> wrote:
>>>
>>>
>>> Do I need to align the clutch disc to the pilot bushing if
>>> I never disassembled the clutch? I only worked on the
>>> gearbox, not the clutch....
>>>
>>> Dave
>>>
>>> On Thu, Nov 11, 2021 at 5:57 PM TeriAnn J. Wakeman <tjwakeman at gmail.com>
>>> wrote:
>>>
>>> On 11/11/21 1:30 PM, David Friedlander wrote:
>>>
>>> You used a clutch disc centering tool to align the clutch disc to the
>>> pilot bushing .. right? And maybe just a thin smear of grease on the
>>> leading edge of the  gearbox gears?  You have the bottom of the bellhousing
>>> sitting on a 2X4 over the crossmember. Otherwise just try to line it up as
>>> best as possible (It helps to have you looking down and a second person
>>> looking at the side). have the gearbox in 4th gear & when the shaft & disc
>>> splines touch, wiggle the rear output shaft a little to get the splines
>>> lined up. Maybe putting out a wee dram of Baleys the night before can't
>>> hurt and you can finish off whatever is left after the spline slides in.
>>>
>>> TeriAnn
>>>
>>> On what page of the manual is the incantation to speak over this
>>> effort?
>>> Must be spoken with a Limey accent, right?  :- )
>>>
>>> Dave
>>> '59 TR3A
>>>
>>>
>>> --
>>>
>>> Book - The Essential Guide to Overland Travel in the United States and
>>> Canada <http://overlandtravel.us>
>>> 2 years to write and 38 years of travel and camping to learn what to
>>> write
>>>
>>> *Because the world beckons and life waits for no one*
>>> ** triumphs at autox.team.net **
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/pipermail/triumphs
>>> http://www.team.net/archive
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
>>>
>>> ** triumphs at autox.team.net **
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/pipermail/triumphs
>>> http://www.team.net/archive
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
>>>
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
>>
>> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211111/d577e0f5/attachment.htm>