[TR] Sources for TR4A shift knobs with a momentary push button switch (preferably lighted) to control my overdrive?

[DAVID MASSEY]

 I may have mis-interpreted your request.  No I have not seen a Shift Knob with a lighted (lit?*) push-button.  You may need to modify a surplus knob.  Not too difficult with a drill press but an end-mill will be better.
Oh, and, by the way, the TR3 has  hollow shift lever just for such a device allowing the wires to be routed down the shaft.  This makes those shift levers particularly week and prone to breakage.  You may have to run your wires down the outside of your lever.  Some heat shrink tubing should make it cosmetically presentable.
 
Dave 
 * The adjective "lighted" indicates that there is a source of illumination included in the part and the adjective "lit"  means it is currently being illuminated.

 
 
-----Original Message-----
From: Dave Connitt <dconnitt at fuse.net>
To: Triumphs <triumphs at autox.team.net>
Sent: Sun, Dec 11, 2022 5:24 pm
Subject: [TR] Sources for TR4A shift knobs with a momentary push button switch (preferably lighted) to control my overdrive?

Hi All, 
Several months back I purchased a logic driven overdrive controller for the A-type overdrive in my TR4A. It needs a momentary switch to turn it on and off. The controller also has an LED indicator option so it would be nice if the switch had a built-in LED feature too.
Anyone ever seen one?
Thanks,
Dave Connitt

Sent from my IPhone 
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221212/47629267/attachment.htm>