[TR] TR3A Overdrive lock washer alternative

[Art McEwen]

Thanks, I'll check around for them.

On Sun, Jan 23, 2022 at 2:58 PM jerry van vlack <jerryvvtr4a at gmail.com>
wrote:

> These would work
>
>
>
> bent-tab washers | McMaster-Carr
> <https://www.mcmaster.com/bent-tab-washers/tab-lock-washers-6/>
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows
>
>
>
> *From: *Art McEwen <artwmcewen at gmail.com>
> *Sent: *Sunday, January 23, 2022 2:41 PM
> *To: *triumphs at autox.team.net
> *Subject: *[TR] TR3A Overdrive lock washer alternative
>
>
>
> The little tab washers (#20 below) over the bridge bars that lock the
> operating pistons in place are N/A.    I've got grade 5 nyloc nuts that
> theoretically shouldn't need them but they're only grade 5 vs. the original
> gr8 nuts.   I've heard others have used this as a substitute.
>
>
>
> Should I be concerned?  I know there are some high pressures involved
> inside the O/D but not sure about this location.
>
>
>
> https://mossmotors.com/triumph-tr2-3-4/clutch-gearbox-drivetrain/overdrive
>
>
>
> Cheers,
>
>
>
> Art.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220123/42f3c9e6/attachment.htm>