[TR] TR3 door stud

[Joel Justin]

On my TR3A (TS60XXX), they are fastened with machine screw studs with nuts on the back. I know because when I read your post, I went out and found one of mine loose! Remove the door card and you'll find ~1/2" holes is the sheet metal behind each of the studs. The nut on my loose one was 11/32". If the hole has become enlarged, you could put a thin flat washer on the back. If it's really enlarged, you might also try a small stainless steel washer on the front.

Joel Justin...

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230804/c69da15a/attachment.htm>