[TR] TR4 front engine lifting bracket wanted

[Michael Burdick]

If you are not after originality and just need something functional for
lifting the engine, I bought a few lifting tabs from A&A Manufacturing
several years ago and they have been extremely handy to have around for
miscellaneous tasks, and they are not too expensive:

https://www.aa-mfg.com/product/engine-lift-tab-1-hole-1-2-hole/
https://www.aa-mfg.com/product/aa-389-a-45-degree-bend/
https://www.aa-mfg.com/product/aa-389-b-flat/

I bought the 45 degree ones and just bolt them in a convenient place for
the lift and then take them off when done.

Hope this helps,
Mike


On Mon, Jul 24, 2023 at 9:34 AM Tom Fansher <tfansher at comcast.net> wrote:

>
> Looking for a front engine lifting bracket for a four cylinder wet liner
> engine. They are NLA from the usual sources. Anyone have a spare or
> unwanted one?
> TIA
> Tom Fansher
> 61 TR3A since 1972
> 62 TR4 down for rebuild since 1996
> Sent from my iPhone
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/salty1249y@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230724/263f079d/attachment.htm>