[TR] TR250 windshield install

[Michael Burdick]

Moss and most of the other suppliers sell a tool that is supposed to help
make the job a bit easier. If you search on “windshield weatherstrip
beading tool” you should find it. I cludged together something similar from
bits I had laying around in the shop when I did mine. It was a fiddly job,
but with patience, it goes in.  As I recall, a bit of soapy water helped.

Good luck!
Mike


On Fri, Sep 1, 2023 at 12:17 PM Tom Fansher <tfansher at comcast.net> wrote:

> Ok helping a buddy. The windshield is installed and now for the chromed
> plastic finisher. It doesn’t want to “slip” into the groove in the black
> rubber glazing. The groove is REALLY tight. Any suggestions from TR4, 250
> or Tr6 guys?  Stuff cord into the groove and apply heat?
> TIA
> Tom Fansher
> 61 TR3
> 62 TR4
>
> Sent from my iPhone
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/salty1249y@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230901/3e7e6796/attachment.htm>