[TR] TR250 windshield trim question.

[Roger Elliott]

What I found to be very useful on my GT6, which has the same windshield, 
is the Gunson trim tool.  It is available from various sources.

I spend several hours over the course of a week trying to get the trim 
in using various methods. Once I used this, it took me about 1/2 hour.

Third try without attachment.  Here is link: 
https://www.gunson.co.uk/Product/77136/Windscreen-Installation-Tool-Set

Roger Elliott
>
>> On 9/1/2023 10:53 AM, Tom Fansher wrote:
>>> Ok helping a buddy. The windshield is installed and now for the 
>>> chromed plastic finisher. It doesn’t want to “slip” into the groove 
>>> in the black rubber glazing. The groove is REALLY tight. Any 
>>> suggestions from TR4, 250 or Tr6 guys?  Stuff cord into the groove 
>>> and apply heat?
>>> TIA
>>> Tom Fansher
>>> 61 TR3
>>> 62 TR4
>>>
>>>