[TR] TR250 windshield install

[keithstewart at bell.net]

. and a few judiciously placed whacks with a rubber hammer can assist .
along with Greg's suggestions. Make sure the insertion edge is lined up
exactly and start with gentle taps.

 

 

Keith Stewart

keithstewart at bell.net <mailto:keithstewart at bell.net> 

World of Triumph  <https://worldoftriumph.godaddysites.com/>
https://worldoftriumph.godaddysites.com/

 

 

 

From: Greg Lemon grglmn at gmail.com <mailto:grglmn at gmail.com>  
Sent: Friday, September 1, 2023 1:10 PM
To: Tom Fansher tfansher at comcast.net <mailto:tfansher at comcast.net> 
Cc: Andrew Uprichard triumphs at autox.team.net
<mailto:triumphs at autox.team.net> 
Subject: Re: [TR] TR250 windshield install

 

I have done a few, if the windshield is in that is the hard part, try a
lubricant that easily cleans or dries off, soapy water, window cleaner.
Warm sun will soften the rubber too if you are working somewhere cool.

 

Greg Lemon

TR250

 

On Fri, Sep 1, 2023, 11:46 AM Tom Fansher <tfansher at comcast.net
<mailto:tfansher at comcast.net> > wrote:

Ok helping a buddy. The windshield is installed and now for the chromed
plastic finisher. It doesn't want to "slip" into the groove in the black
rubber glazing. The groove is REALLY tight. Any suggestions from TR4, 250 or
Tr6 guys?  Stuff cord into the groove and apply heat?  
TIA
Tom Fansher
61 TR3
62 TR4



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230902/e1aad77b/attachment.htm>