[WPTA] Dwell angle adjustment
Ray Mihalko
raymihalko at hotmail.com
Thu Dec 22 20:37:01 MST 2022
All,
I recently gapped a new set of points to .015 mm, on the Spitfire then wanted to check the dwell angle. My son and I checked the dwell this afternoon and found it to be slightly out of spec at 42.3 degrees. Spec shows 40-42 degrees.
Does one take the vacuum advance hose off so it is a ‘true’ angle measurement? Mine is connected and visually pulls a vacuum on the distributor. Is this small amount mean there should be less or more of a gap?
Thanks for your help!
Ray Mihalko
Sent from my iPhone
More information about the Wpta
mailing list