[Zmagnette] Gas tank photo

charles durning durningcharles at gmail.com
Wed Dec 4 10:00:34 MST 2013


Mike,

Do you have their contact information?

Charlie Durning

If you are using Google or Gmail, Big Brother is watching.



On Wed, Dec 4, 2013 at 10:43 AM, sandyandmike <sandyandmike at fuse.net> wrote:

>  I sent mine to Looper in Pennsylvania, not cheap, but a Damn nice job, I
> don’t like taking chances with Gasoline.
>
>
>
> Mike H.
>
>
>
> *From:* zmagnette-bounces at autox.team.net [mailto:
> zmagnette-bounces at autox.team.net] *On Behalf Of *charles durning
> *Sent:* Wednesday, December 04, 2013 11:38 AM
>
> *To:* List for the Z Magnette Group - North America
> *Subject:* Re: [Zmagnette] Gas tank photo
>
>
>
> Arch,
>
>
>
> You might want to get some opinions on tank sealers.  Some just make a
> huge mess of things.  I know there are some good ones, I just haven't found
> those.  You might check with Eastwood.  The key to a good seal is the
> inside of the tank must be flawless.  Otherwise the stuff just peals off
> and makes a mess.
>
>
>
> Charlie Durning
>
>
>
> If you are using Google or Gmail, Big Brother is watching.
>
>
>
>
>
> On Wed, Dec 4, 2013 at 10:27 AM, Arch Boston <arch.boston at twc.com> wrote:
>
> Charlie & Wray, Thanks for reply.  I now know a bit more about what I am
> in for.  Since the tank has to come out I might as well have it sealed even
> though it is not leaking.  Arch
>
> Sent from my iPad
>
>
> On Dec 4, 2013, at 7:11 AM, charles durning <durningcharles at gmail.com>
> wrote:
>
>   Arch,
>
>
>
> It is possible to fix that pickup tube.  The tube should be soldiered or
> brazed in place.  A creative radiator shop should be able to remove the
> tube and then install a new tube.
>
>
>
>  Another option is to abandon that pickup and have a radiator shop install
> a threaded bushing (a drain fitting from a radiator is exactly when you
> want) in the top of the tank.  the position should be like the picture.
> From there you can attach a tube to a fitting.  Be sure to cut the bottom
> of the tube at a 45 degree angle and also keep the tube at least 1/4 inch
> from the bottom of the tank. If the tank has the screen filter be sure
> to position the new draw tube so it mates up with the screen.
>
>
>
> While that tank is out it will be worth while to clean out any rust or
> accumulated guck.
>
>
>
>
> Charlie Durning
>
>
>
> If you are using Google or Gmail, Big Brother is watching.
>
>
>
>
>
> On Tue, Dec 3, 2013 at 8:39 PM, Arch Boston <arch.boston at twc.com> wrote:
>
> This is the way the parts book says the gas tank should be set up.
>  However, my Magnette doesn't have the banjo nut on the top of the tank for
> gas line.  My tank has a rubber hose located approx 1 1/2 inches under the
> large rubber filler tube for gas line that goes to the fuel pump.  This
> afternoon I replaced the fuel pump ( which was a waste of time and energy).
>  Disconnecting the fuel line from tank should have spilled out a bit of
> gas.  Nothing.  Blowing into gas line I could hear air entering gas
> tank....  Filter not clogged ( if there is one).  So....  The pickup tube
> in the tank must be loose/goofed up.  Has anyone replaced/ repaired this
> pickup?  Hate to go in completely blind.  Arch
>
>
>
> http://1.bp.blogspot.com/-fLg6x6Q8Qk0/UdR7VQ9MbYI/AAAAAAAADIs/ecq6w4bKdGk/s640/2013-07-02+Magnette+gas+tank+refurbish+017+
>
>
> Sent from my iPad
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/durningcharles@gmail.com
>
>
>
>   _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/arch.boston@twc.com
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/durningcharles@gmail.com
>
>
>
> _______________________________________________
> Zmagnette mailing list
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/zmagnette/durningcharles@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/zmagnette/attachments/20131204/458b0fca/attachment.html>


More information about the Zmagnette mailing list